 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FERROXCUBE DATA SHEET E25/10/6 E cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube E cores and accessories CORE SETS Effective core parameters handbook, halfpage E25/10/6 25.4 0.6 18.8 min. 6.35 0.25 6.4 min. 9.65 0.2 SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core half VALUE 1.24 1930 49.0 39.5 37.0 4.8 UNIT mm-1 mm3 mm mm2 mm2 g 6.35 0.25 CBW023 Dimensions in mm. Fig.1 E25/10/6 core half. Core halves AL measured in combination with a non-gapped core half, clamping force for AL measurements, 20 10 N, unless otherwise stated. GRADE 3C81 AL (nH) 63 5%(1) 100 8% 160 8% 250 15% 315 15% 2340 25% 3C90 63 5%(1) 100 8% 160 8% 250 15% 315 15% 1600 25% 3C91 3C92 3C94 3C96 2008 Sep 01 2340 25% 1320 25% 1600 25% 1470 25% e 62 99 158 247 311 2310 62 99 158 247 311 1580 2310 1300 1580 1450 370 TOTAL AIR GAP (m) 1240 660 360 210 160 0 1240 660 360 210 150 0 0 0 0 0 TYPE NUMBER E25/10/6-3C81-E63 E25/10/6-3C81-A100 E25/10/6-3C81-A160 E25/10/6-3C81-A250 E25/10/6-3C81-A315 E25/10/6-3C81 E25/10/6-3C90-E63 E25/10/6-3C90-A100 E25/10/6-3C90-A160 E25/10/6-3C90-A250 E25/10/6-3C90-A315 E25/10/6-3C90 E25/10/6-3C91 E25/10/6-3C92 E25/10/6-3C94 E25/10/6-3C96 Ferroxcube E cores and accessories AL (nH) 63 5%(1) 100 8% 160 8% 250 15% 315 15% 1470 25% 3F35 Note 1150 25% e 62 99 158 247 311 1450 1140 TOTAL AIR GAP (m) 1240 660 360 210 150 0 0 E25/10/6 GRADE 3F3 TYPE NUMBER E25/10/6-3F3-E63 E25/10/6-3F3-A100 E25/10/6-3F3-A160 E25/10/6-3F3-A250 E25/10/6-3F3-A315 E25/10/6-3F3 E25/10/6-3F35 1. Measured in combination with an equal gapped core half, clamping force for AL measurements, 20 10 N. Core halves of high permeability grades Clamping force for AL measurements, 20 10 N. GRADE 3E27 AL (nH) 3200 25% e 3160 AIR GAP (m) 0 TYPE NUMBER E25/10/6-3E27 Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 C 320 330 320 370 330 340 320 300 f = 25 kHz; B = 200 mT; T = 100 C 0.4 0.2 - - - - - - CORE LOSS (W) at f = 100 kHz; B = 100 mT; T = 100 C - 0.22 0.13 (1) 0.17 0.17 0.13 0.22 - f = 100 kHz; B = 200 mT; T = 100 C - - 0.8(1) 1.0 1.0 0.8 - - f = 400 kHz; B = 50 mT; T = 100 C - - - - - - 0.38 - 3C81 3C90 3C91 3C92 3C94 3C96 3F3 3F35 Properties of core sets under power conditions (continued) B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 C 340 320 300 f = 500 kHz; B = 50 mT; T = 100 C 0.7 - 0.26 CORE LOSS (W) at f = 500 kHz; B = 100 mT; T = 100 C - - 2.0 f = 1 MHz; B = 30 mT; T = 100 C - - - f = 3 MHz; B = 10 mT; T = 100 C - - - 3C96 3F3 3F35 Note 1. Measured at 60 C. 2008 Sep 01 371 Ferroxcube E cores and accessories COIL FORMERS General data for E25/10/6 coil former without pins PARAMETER Coil former material Maximum operating temperature SPECIFICATION E25/10/6 polyamide (PA6.6), glass reinforced, flame retardant in accordance with "UL 94V-2" 105 C, "IEC 60085", class A handbook, full pagewidth 12.25 max. 10.8 18.8 max. 6.5 min. 8 CBW024 Dimensions in mm. Fig.2 E25/10/6 coil former. Winding data and area product for E25/10/6 coil former without pins NUMBER OF SECTIONS 1 MINIMUM WINDING AREA (mm2) 56.2 NOMINAL WINDING WIDTH (mm) 10.8 AVERAGE LENGTH OF TURN (mm) 49.1 AREA PRODUCT Ae x Aw (mm4) 2220 TYPE NUMBER CP-E25/10/6-1S 2008 Sep 01 372 Ferroxcube E cores and accessories General data for 10-pins E25/10/6 coil former PARAMETER Coil former material Pin material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION E25/10/6 polyamide (PA), glass reinforced, flame retardant in accordance with "UL 94-HB"; UL file number E41938(M) copper-zinc alloy (CuZn), tin (Sn) plated 130 C, "IEC 60085", class B "IEC 60068-2-20", Part 2, Test Tb, method 1B: 350 C, 3.5 s "IEC 60068-2-20", Part 2, Test Ta, method 1: 235 C, 2 s handbook, full pagewidth 18.7 max. 8.8 6.6 min. 12.35 max. 10.1 20.4 max. 6.5 min. 8.65 4.05 min. 3.8(1) 5.1 CBW025 1.0 0.65 15.6 21.1 max. 26.3 max. (1) one place only Dimensions in mm. Fig.3 E25/10/6 coil former; 10-pins. Winding data and area product for 10-pins E25/10/6 coil former NUMBER OF SECTIONS 1 MINIMUM WINDING AREA (mm2) 47.4 NOMINAL WINDING WIDTH (mm) 10.1 AVERAGE LENGTH OF TURN (mm) 53.1 AREA PRODUCT Ae x Aw (mm4) 1870 TYPE NUMBER CPH-E25/10/6-1S-10P-Z 2008 Sep 01 373 Ferroxcube E cores and accessories MOUNTING PARTS General data for mounting parts ITEM Clamp REMARKS stainless steel (CrNi); clamping force 30 N FIGURE 3 E25/10/6 TYPE NUMBER CLM-E25/10/6 handbook, halfpage 6.35 26.5 19.8 0.4 CBW026 5 Dimensions in mm. Fig.3 E25/10/6 clamp. 2008 Sep 01 374 Ferroxcube E cores and accessories DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS E25/10/6 This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 375 |
Price & Availability of E25-3C90
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |